EXHAUST

EVP is proud to offer another option to our arsenal of exhausts for the Can Am Maverick X3 – the SHOCKER Electric Side Dump Race Bypass Pipe. The SHOCKER allows customers to keep the factory or other quiet exhaust, but utilize the cutout function for more performance and sportier sound when desired.  The SHOCKER pipe has an electric cutout valve and a plug and play wiring harness with custom switch that controls the valve operation.  With the valve closed, the exhaust is forced through the OEM or other aftermarket slip on exhaust, but with it open you will hear the 3 cylinder Rotax engine scream and free up some additional power! 

Our exhausts are proudly made in the USA in Phoenix, AZ and are constructed of the finest TIG welded 304 Stainless Steel. 

• Electric cut out valve, race bypass pipe for the Maverick X3
• Plug and Play wiring harness requires no cutting or splicing!
• Made in the USA by American Craftsman
• Up to 6 additional horsepower with the cut out open (depending upon tune)

• Electric cut out valve pipe for the RZR XP Turbo
  
• Plug and Play wiring harness requires no cutting or splicing!
• Made in the USA by American Craftsman
• Up to 6 additional horsepower with the cut out open (depending upon tune)
• Reuses factory heat shields

• First in the industry production “Cut Out” Style Exhaust for the Polaris XP Turbo
• Color matched heat shield for many Polaris colors
• Made in the USA by American Craftsman
• Simple installation with detailed instructions included
• Up to 6 additional horsepower with the cut out open (depending upon tune)
• Spark arrestors included
• PnP wiring
• Slip on or 3″ Turbo Back systems
  
• Fits 2016-2019 Models

• NEW – plug and play wiring harness with custom dash mounted switch instead of the wireless key FOB.
• First in the industry production electric “Cut Out” Style Exhaust for the Maverick X3
• Color matched accessories to match your vehicle!
• Made in the USA by American Craftsman
• Up to 6 additional horsepower with the cut out open (depending upon tune)
• Simple installation with detailed instructions included
• Spark arrestors included
• Extremely simple, plug and play wiring
• Two methods for installation for custom look – your choice

• Direct replacement for OEM plenum
• Runners CNC cut from 6061 aluminum
• Body fabricated from CNC bent aluminum then TIG welded for strength.
• Better flow distribution between runners vs OEM
• Tested to over 42 PSI
• Higher flow potential compared to stock
• O-ring throttle body seals
• Reuses OEM gasket and standoffs for correct sealing and torque
• All necessary hardware included

• Color matched accessories to match your vehicle!
• Made in the USA by American Craftsman
• Simple installation with detailed instructions included
• Spark arrestor included
• Horsepower increase
  
• Fits 2016-2019 models

Evolution Powersports is proud to be the first to market with more quality exhaust parts for the Can Am Maverick X3!  Our 304 Stainless, TIG welded X3 Race Bypass Pipe frees up additional HP and substantially lowers temperature radiating from the exhaust components.  Any restriction after the turbo directly affects horsepower.  The EVP race bypass pipe will net you approximately 4 wheel horsepower over the OEM exhaust (tuning is recommended for correct fueling). These components fit just like stock and reuse the factory mounting locations and heat shields.

• Our Race Bypass pipe does not neck down like the factory cat pipe.  Rather than reuse the factory graphite doughnut, we convert the end to a ball/socket which perfectly mates up to the OEM or any EVP X3 exhaust.  This change alone made a substantial difference in back pressure when running tunes or a big turbo setup!
  

• The Race Bypass with “Bullet” option adds a small silencer to the turbo pipe which mellows the exhaust tone substantially when running a muffler bypass pipe.
• Extremely lightweight!
• Lowers heat radiating from the exhaust components
• Adds approximately 4 horsepower (tuning recommended for fuel corrections)
• Reuses factory heat shields
• The EVP Race Bypass Pipe connects to the OEM Muffler or any of our Slip On Muffler options
  

• Optional extra O2 bung for an AFR gauge

• Requires the EVP charge tube kit
• First in the industry production “Cut Out” Style Exhaust for the XP Turbo
• Color matched accessories to match your vehicle!
• Made in the USA by American Craftsman
• Simple installation with detailed instructions included
• Up to 6 additional horsepower with the cut out open (depending upon tune)
• Spark arrestors included
• No electrical wiring required!
• Fits 2016-2019 models

Evolution Powersports is proud to be the first to market with more quality exhaust parts for the Can Am X3!  Our 304 Stainless, TIG welded X3 Race Bypass Pipe & Muffler Bypass Pipe frees up additional HP and substantially lowers temperature radiating from the exhaust components.  Any restriction directly affects horsepower.  The EVP Race bypass pipe & muffler bypass pipe slip on will net you approximately 4 wheel horsepower over the factory exhaust (tuning is recommended for correct fueling).  Our slip on exhaust fits just like stock and reuses the factory mounting locations, tip and spark arrestor.  All factory heat shields are reused!

• NEW – we can add a small “Bullet” silencer to the Race Bypass section of the full race pipe.  This mellows the straight pipe just a little bit by taking the “bite” out of the tone.
• Extremely lightweight!
• Sport exhaust note
• Lowers heat radiating from the exhaust components
• Adds approximately 4 horsepower (tuning recommended for fuel corrections)
• Reuses factory heat shields, exhaust tip and spark arrestor
• The EVP Race Bypass Pipe connects to the OEM or EVP Slip On muffler!
• The Muffler Bypass Pipe connects to the OEM or EVP Race Bypass Pipe!
• Optional extra o2 bung for an AFR gauge

Evolution Powersports has another quality exhaust to add to our arsenal for the Can Am Maverick X3!  Our 304 Stainless, TIG welded “Magnum” Slip On Exhaust frees up additional HP and substantially lowers temperature radiating from the exhaust components.  Any restriction after the turbo directly affects horsepower.  The EVP “Magnum” exhaust is only slightly louder than stock but allows you to hear the Rotax engine sing! (tuning is recommended for correct fueling).  Our exhausts fit just like stock and reuses the factory mounting locations, tip and spark arrestor.  All of our exhausts are race tested to ensure durability and performance

• Lowers heat radiating from the exhaust components
• Adds approximately 4 horsepower depending upon tune
• Our “Magnum” Slip On connects to the OEM or EVP Race Bypass Pipe!
• Optional extra o2 bung for an AFR gauge
• Reuses OEM spark arrestor and tip

EVP is proud to offer another option to our arsenal of exhausts for the Can Am Maverick X3 – The “Captain’s Choice”.  The Captain’s Choice slip on is a cut out style exhaust and is only slightly louder than as the OEM with the cut out valve closed, but with it open, you will hear the 3 cylinder Rotax engine sing!  The built in house, 304 stainless steel muffler has two pathways inside – a boost actuated exhaust valve controls whether the exhaust has to go through the quiet channel, or the second path which is a straight pipe through the muffler.    The cutout valve is operated by boost pressure via an EVP supplied connection and hose and fitting.  This is the simplest The valve opens automatically at approximately 5 PSI of boost.  Below 5 PSI and the valve is closed and the exhaust is quiet. Detailed instructions are included. 

Since the Captain’s Choice is a side dump exhaust, there are two choices with respect to the OEM rear valence.  Either you can keep the rear valence and we supply you with a powder coated block off plate to give the OEM exhaust hole a cool finished look. The second option is to delete the rear OEM rear valence.  In this case we supply you with a powder coated EVP exhaust heat shield to further enhance the look of your X3.  See photo gallery for the different installations.

Our exhausts are proudly made in the USA in Phoenix, AZ and are constructed of the finest TIG welded 304 Stainless Steel.  No other manufacturer builds exhausts like we do.  Most other manufacturers buy exhaust mufflers from China and weld on pipes to make them fit.  Our mufflers are custom made for each application with construction and packing designed to last the life of your vehicle.

• First in the industry production “Cut Out” Style Exhaust for the Maverick X3
• Color matched accessories to match your vehicle!
• Made in the USA by American Craftsman
• Up to 6 additional horsepower with the cut out open (depending upon tune)
• Simple installation with detailed instructions included
• Spark arrestors included
• No electrical wiring required!
• Slip on TIG Welded, 304 Stainless Steel exhaust

Note: the 2018 & 2019 RS1 and XP 1000 use the same exhaust.  When choosing an exhaust for an RS1, select 2015+ for model year