ACCESSORIES

The Geiser Performance Tie-Down Mounts provide an easy and reliable solution to strapping down your X3. These mounts hook right on the factory shipping points. Installation is less than 5 seconds!

DISCLAIMER:

 IT IS THE END USERS RESPONSIBILTY TO ENSURE TIE DOWNS ARE SEATED PROPERLY. DAMAGES OR  HARM CAUSED BY IMPROPER USE OF TIE DOWN MOUNTS IS AT THE END USERS FAULT. GEISER PERFORMANCE HOLDS NO LIABILITY FOR IMPROPER USE.

The Geiser Performance Shift Knob was designed with functionality and style in mind. This knob replaces the OEM shift knob with a billet 6061 CNC machined knob. With an easy, 2 minute install this upgrade is worth it.

• Fits all Can AM X3 models.

The Geiser Performance Shift Gate replaces the OEM set up with a custom 5052 aluminum shift plate the features a quick shift patter for going from low to reverse.

*Some trimming of OEM plastic shift gate required for install.

Linq's are used to mount the cargo rack to the bed. 

Sturdy full-lock fastening system featured on a complete line of accessories.

No tools required. Simple, fast, dependable and secure.

Quick release accessory

Can Am x3

*One box comes with two Linq's. 

The Geiser Performance Cargo Rack mounts directly into the bed of your X3 to hold everything you need on your ride. The several strapping points make it easy to secure coolers, tool bags, or whatever else you can throw in.

Rack dimensions: 34.5"x18"x4". LinQs are used to mount the cargo rack to the bed. These are available as an add-on at checkout.

*Raw products are not powder coated clear. If you choose to purchase raw, it will need to have some coating applied otherwise it will rust. Clear coat is available for an additional cost upon special request.

The Geiser Performance Bulk Head was designed to enhance the durability of your X3's front suspension and chassis. Constructed of 4130 chromoly steel, this product is guaranteed to offer unsurpassed performance.

• Fits all Can Am Maverick X3 models.

The Can Am X3 Emergency A-Arm repair kit is constructed of .125 4130 and held together with .375 grade 8 hardware. It is used in emergencies when there is a lower A-Arm failure. This is not a permanent repair but is used to get you back to your camp. The kit fits nicely in a door bag or tool bag. 

The Geiser Performance Grille replaces the plastic OEM option with and aggressive CAD-designed 5052 aluminum grille that will provide optimum air flow to your x3's cooling system while also giving you major style points.

• Includes 1/4"-20 x 1/2" stainless steel button head bolts for installation.
• Geiser Performance emblem available in several color options.
• Fits all Can-Am Maverick X3 models.

The Geiser Performance Can Am X3 full door skins are built to fit the factory door frame for an easy install. The laser cut aluminum skins are powder coated for a clean and durable finish. These doors provide full coverage, from the top of the body line to the lower plastics. Price includes 4 Door OEM Kit (driver, passenger side, left and right rear doors). Doors come powder coated in black. Includes hardware kit for install.

The Geiser Performance Can Am X3 full door skins are built to fit the factory door frame for an easy install. The laser cut aluminum skins are powder coated for a clean and durable finish. These doors provide full coverage, from the top of the body line to the lower plastics. Price includes pair of doors (driver and passenger side). Doors come powder coated in black.

CLICK HERE for install instructions.

Now available as a 3-part kit. The Geiser Performance Shift Knob, grab handle and shift gate are designed with functionality and style in mind. The shift knob replaces the OEM shift knob with a billet 6061 CNC machined knob. With an easy, 2 minute install this upgrade is worth it.

The Geiser Performance Can Am X3 Grab Handle replaces the OEM grab handle with a billet 6061 CNC machined handle. All needed hardware is included.

The Geiser Performance Shift Gate replaces the OEM set up with a custom 5052 aluminum shift plate the features a quick shift patter for going from low to reverse.

*Some trimming of OEM plastic shift gate required for install.

What is an air/oil separator or “catch can” and why do you need one? The factory recirculates crankcase air back into the intake. This air contains oil, moisture and other combustion byproducts which contaminates the air that is being fed to the turbocharger. The oil and water infused air coats the turbocharger compressor blades, charge tubes, inter cooler and intake valves. It can also change the air/fuel ratio and lower the effective octane of the mixture being introduced into the cylinder. Oil has a very low knock threshold, therefore the more oil contained in the incoming air, the lower the effective knock protection of whatever fuel is being used.

The EVP Air/Oil Separator or “Catch Can” is designed specifically for the Can Am X3 and eliminates the issues described above. Our CNC machined billet aluminum separator mounts to the frame rail above the clutch housing. The OEM crankcase vent hose is simply rerouted to the new location. The EVP separator has a cleanable filter element, pre filter and features a port at the bottom for periodic emptying of the contaminants. A silicone cap is supplied to block off the port on the intake boot where the OEM breather hose is connected. All hardware is stainless steel and the body of the separator is powder coated black.

The Geiser Performance Wind Diffuser is built to divert wind and dirt out of your face as well as add style to your ride.

• Bolts on to any roll cage with supplied bolts.
• Requires drilling of roll cage.
• Screens and "G" come in raw and are bolt on for easy removal for paint.

The Geiser Performance Can Am X3 Number Plates are the quickest way to transform your everyday X3 into a race X3

• Powder coated black.
• Sold as a set.
• Uses OEM hardware to install.
• Add customizable decals!

The Geiser Performance ECU and Battery Covers protect the open ECU and battery compartments from dirt and debris.

2019 model comes with factory cover for the ECU side. You will only need the battery cover for this model.

Fits all Maverick X3 models Hardware provided.

The perfect storage bag for your Can-Am Maverick X3. This custom fitted PRP bag fits perfectly inside the Geiser Performance Can-Am X3 Cargo Rack. The sturdy, weather resistant material and secure mounting system will keep your items safe on your side by side adventures!

The Geiser Performance Hitch Receiver Plate is made from TIG welded 4130 chromoly for added strength and features a 2" hitch receiver.

• Fits all X3 models.

The Geiser Performance Steering Wheel Switch Pro Pod offers a clean and convenient solution for mounting your Switch Pro SP-9100 system.

• Does not include Switch Pro.

GEISER PERFORMANCE CAN-AM X3 REAR SWAY BAR LINKS ARE THE PERFECT COMBINATION OF PERFORMANCE AND STYLE WITH A SLEEK BLACK ANODIZED FINISH WITH MACHINED EDGES CONSTRUCTED FROM 6061 BILLET ALUMINUM. OUR KIT USES HEAVY DUTY 5/8" ROD ENDS AND AISI 304 STAINLESS STEEL HIGH ANGLE SPACERS. WORKS WITH BOTH STOCK AND AFTERMARKET TRAILING ARMS.

• DIRECT FACTORY BOLT-ON
• FITS AFTERMARKET TRAILING ARMS
• 6061 BILLET ALUMINUM
• BLACK ANODIZED WITH MACHINED FACES
• REDUCES BODY ROLL 
• HEAVY DUTY 5/8" ROD ENDS
• AISI 304 STAINLESS STEEL HIGH ANGLE SPACERS
• FITS BOTH 64"/72" MODEL CAN-AM X3's
• RIGHT HANDED THREAD INDICATOR

KIT INCLUDES:

• 2 - CAN-AM X3 REAR SWAY BAR LINKS
• 8 - AISI 304 STAINLESS STEEL HIGH ANGLE SWAY BAR SPACERS
• 2 - LH THREADED JAM NUTS
• 2 - RH THREADED JAM NUTS
• 2 - LH THREADED 5/8" HEAVY DUTY ROD ENDS
• 2 - RH THREADED 5/8" HEAVY DUTY ROD ENDS
• 2 - M12-1.75 SOCKET HEAD BOLTS
• 2 - M12-1.75 NYLON LOCKING NUTS

The EVP Can Am X3 Turbo Hi-Flow High Performance Air Filter System is a Direct-Fit Replacement air filter for the OEM Filter. Our intake system fits within the factory air box. Our higher flowing air filter systems offer significant improvements in air flow, filtration with up to  1 HP increase over stock.  This is especially important with turbo applications as any restriction before the turbo affects power output.  The EVP intake filter system is constructed of the finest synthetic filter material which outperforms the OEM while being washable and reusable.  Our air filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters or the OEM’s can’t capture. This product includes our custom Pre Filter which is designed to keep out particles of dirt and sand debris as small as .005″. Our filters run dry meaning no oils or additives are required. Additionally, our Pre-filters add a second level of protection. The woven mesh is specially treated using a proprietary process to repel water. This hydrophobic water repellent process is not sprayed on; consequently there is virtually no airflow loss. Our Pre-filters are used and recommended by top professional engine builders and race teams worldwide.

• Superior filtration system over the OEM or other performance style filters
• No Oil filter element (DO NOT OIL!!)
• Includes a custom prefilter
• Cleanable with compressed air
• Up to 1 hp gains!

In preparation for our “Shift Tek” line of advanced clutching components, we are bringing to market a line of Can Am X3 clutch service tools designed to make it easy to change weights, primary spring, secondary spring and helix.  It also includes a primary clutch puller in case you need to remove your clutch.

Our clutch service tool set is available both with and without the secondary roller puller. 

MOUNT FOR RUGGED PUMPER SYSTEM. COMES IN BLACK.

If you're in the market to upgrade from the stock x3 door straps, we have you covered! Machined from 6061 aluminum we have designed door handles that fit the stock latches for all 2017-2021 Can-Am X3's. these door handles are similar to our custom door handles for our "Race" doors, except they're billet! these are available in a black anodized finish with machined edges to follow the aesthetic of majority of our billet components, we also have them in a full raw option to allow for people to powder coat them to the color of their choice. 

NOTE: 

Door Handles will not work with PRP door bags, as the cushioned part in the front interferes with the path of the door handle.

Great billet replacement for the cheap, stock, plastic fuel rail.

All fuel rails are precision CNC machined with ORB6 threads

Available with stock replacement fittings, or AN6 fittings

• Direct replacement for OEM plenum
• Runners CNC cut from 6061 aluminum
• Body fabricated from CNC bent aluminum then TIG welded for strength.
• Better flow distribution between runners vs OEM
• Tested to over 42 PSI
• Higher flow potential compared to stock
• O-ring throttle body seals
• Reuses OEM gasket and standoffs for correct sealing and torque
• All necessary hardware included

The EVP Polaris RZR XP Turbo V-Flow High Performance Air Filter System is a Direct-Fit Replacement air filter for the OEM Filter. Our intake system fits within the factory air box and attaches with a clamp to the airbox. Our higher flowing air filter systems offer significant improvements in air flow, filtration with up to  2 HP increase over stock.  This is especially important with turbo applications as any restriction before the turbo affects power output.  The EVP intake filter system is constructed of the finest synthetic filter material which outperforms the OEM while being washable and reusable.  Our air filters trap the smallest dirt particles that ordinary cotton-gauze “performance” filters or the OEM’s can’t capture. This product includes our custom Pre Filter which is designed to keep out particles of dirt and sand debris as small as .005″. Our filters run dry meaning no oils or additives are required. Additionally, our Pre-filters add a second level of protection. The woven mesh is specially treated using a proprietary process to repel water. This hydrophobic water repellent process is not sprayed on; consequently there is virtually no airflow loss. Our Pre-filters are used and recommended by top professional engine builders and race teams worldwide.

• Superior filtration system over the OEM or other performance style filters
• No Oil filter element (DO NOT OIL!!)
• Includes a custom prefilter
• Cleanable with compressed air
• Up to 2 hp gains!

The Geiser Performance Grille replaces the plastic OEM option with and aggressive CAD-designed 5052 aluminum grille that will provide optimum air flow to your Polaris RZR cooling system while also giving you an aggressive styled front grille

• Includes (4) Black self-tapping screws for installation
• Geiser Performance emblem available in several color options.
• Fits all RZR XPT/S models.

Currently, lead time on our kits is 2-3 weeks

ZOLLINGER RACING PRODUCTS (ZRP) HAS BEEN IN THE WORKS OF ENGINEERING AN ALTERNATOR KIT FOR THE CAN-AM X3 TO SOLVE LOW VOLTAGE ISSUES.

This kit was designed to cater to racers needs. But also is an excellent upgrade for those who choose to run multiple electronic components.

As many of you know (especially racers) voltage issues is a big deal. Your OEM stator can not keep up with the demand of multiple electrical components (lights, stereos, pumpers, comms, nav, power steering, ignition.

Industry leading racers are unable to run all of their electronic components during a race due to low voltage limp modes.

As your stator heats up, along with all of your other electrical components like power steering and ignition, the stator produces less and less power, while those components require more and more power as they heat up.

Our alternator kit adds an additional 75AMP and still uses your factory stator output. This kit is a bolt on kit, and requires you to swap your existing stater over to our billet stator housing.

Zollinger Racing Products X3 Alternator kit includes the following.

• Billet Magneto Cover

• 75 amps @ 12.6V Alternator

• Billet mounting brackets

• Billet Pulleys

• Billet Belt Cover

• ARP mounting bolts

• Gates pulley belt

• 4G power wire

All alternators will come with the following pre-installed hardware.

• Oil seal

• Shaft

• Water Pump Gear and Impeller.

• Cover gasket

You will need to re-use the following

• Water pump cover and gasket

• Oil Pressure Sensor

• Crank Position Sensor

• Oil Temp Sensor

• Cover bolts (we provide the required bolt and spacer)

• Magneto

• Oil Filter Cap

This kit reuses all factory hose mounting hardware.

This kit has less than 2hp draw.

This kit is designed for racing purposes. If you are not confident in completing the install please take it to a qualified shop to insure proper installation.

Currently, lead time on our kits is 2-3 weeks

Actual part may vary from the pictures shown

Allows for the addition of an oil cooler on the Can Am X3.

Uses AN-8 fittings

Eliminate the possibility of loosing a coolant line with this billet AN fillet water pump cover for the X3.

• AN 16 fitting for the main coolant line.

• AN 6 fitting for the turbo line.

• Must convert your coolant lines to AN fitting to use this cover.