The Geiser Performance Tie-Down Mounts provide an easy and reliable solution to strapping down your X3. These mounts hook right on the factory shipping points. Installation is less than 5 seconds!
CAN AM X3 INNER CLUTCH LINER
The Geiser Performance 1-Piece Inner Clutch Housing add-on lines the inside of the factory clutch cover. It's purpose is to strengthen the cover and protect it from breaking when a belt breaks. Constructed of .080 aluminum.
*Does not include clutch cover.
CAN AM X3 SHIFT GATE
The Geiser Performance Shift Gate replaces the OEM set up with a custom 5052 aluminum shift plate the features a quick shift patter for going from low to reverse.
*Some trimming of OEM plastic shift gate required for install.
CAN AM X3 SHIFT KNOB
The Geiser Performance Shift Knob was designed with functionality and style in mind. This knob replaces the OEM shift knob with a billet 6061 CNC machined knob. With an easy, 2 minute install this upgrade is worth it.
Fits all Can AM X3 models.
CAN AM X3 STRAP TAB
The Geiser Performance Strap Tab attached to the Can Am LINQS and provides a durable attachment point for strapping stuff in the bed of your X3.
LINQS not included.
CAN AM X3 SHOCK TOWER MOUNT
The Geiser Performance Shock Tower Mount replaces the factory piece with a TIG welded 4130 chromoly steel shock tower mount.
Fits all X3 models.
CAN AM X3 GRAB HANDLE
The Geiser Performance Can Am X3 Grab Handle replaces the OEM grab handle with a billet 6061 CNC machined handle. All needed hardware is included. Available for individual purchase or as a set with Shift Knob and Shift Gate.
CAN AM X3 CARGO RACK
The Geiser Performance Cargo Rack mounts directly into the bed of your X3 to hold everything you need on your ride. The several strapping points make it easy to secure coolers, tool bags, or whatever else you can throw in.
Rack dimensions: 34.5"x18"x4". LinQs are used to mount the cargo rack to the bed. These are available as an add-on at checkout.
*Raw products are not powder coated clear. If you choose to purchase raw, it will need to have some coating applied otherwise it will rust. Clear coat is available for an additional cost upon special request.
CAN AM X3 CLUTCH HOUSING QUICK RELEASE
The Geiser Performance Clutch Housing Quick Release allows for the clutch housing to be removed from the boot without any extra tools. Just a simple click and it goes on and off.
CAN AM X3 BED HEAT SHIELD
The Geiser Performance Heat Shield mounts to the bottom of the bed to reduce the heat coming up from the engine. Tested and proven to save your ice a little longer. Includes all required hardware.
CAN AM X3 FRONT GRILLE
The Geiser Performance Grille replaces the plastic OEM option with and aggressive CAD-designed 5052 aluminum grille that will provide optimum air flow to your x3's cooling system while also giving you major style points.
Includes 1/4"-20 x 1/2" stainless steel button head bolts for installation.
Geiser Performance emblem available in several color options.
Fits all Can-Am Maverick X3 models.
LINQ BED RACK FASTENER
Linq's are used to mount the cargo rack to the bed.
Sturdy full-lock fastening system featured on a complete line of accessories.
No tools required. Simple, fast, dependable and secure.
Quick release accessory
Can Am x3
*One box comes with two Linq's.
CAN AM X3 RADIUS ROD LINK PLATE
The Geiser Performance Link Plate makes it easier than ever to strap down your X3. Constructed of .188 4130 TIG welded chromoly steel, these link plates handle whatever you have to throw at them.
Fits all Can Am Maverick X3 models.
CAN AM X3 LOWER A ARM EMERGENCY REPAIR KIT
The Can Am X3 Emergency A-Arm repair kit is constructed of .125 4130 and held together with .375 grade 8 hardware. It is used in emergencies when there is a lower A-Arm failure. This is not a permanent repair but is used to get you back to your camp. The kit fits nicely in a door bag or tool bag.
SWITCH PRO POD
The Geiser Performance Switch Pro Pod offer a clean and convenient solution for mounting your Switch Pro SP-9100 system.
Fits on 1.75" tubing.
Doesn't include Switch Pro.
CAN AM X3 NUMBER PLATES
The Geiser Performance Can Am X3 Number Plates are the quickest way to transform your everyday X3 into a race X3
Powder coated black.
Sold as a set.
Uses OEM hardware to install.
Add customizable decals!
Measures 21" long x 9" tall.
CAN AM X3 BULK HEAD
The Geiser Performance Bulk Head was designed to enhance the durability of your X3's front suspension and chassis. Constructed of 4130 chromoly steel, this product is guaranteed to offer unsurpassed performance.
Fits all Can Am Maverick X3 models.
CAN AM X3 ECU AND BATTERY COVER KIT
The Geiser Performance ECU and Battery Covers protect the open ECU and battery compartments from dirt and debris.
2019 model comes with factory cover for the ECU side. You will only need the battery cover for this model.
Fits all Maverick X3 models Hardware provided.
CAN AM X3 2 SEAT DOORS
The Geiser Performance Can Am X3 full door skins are built to fit the factory door frame for and easy install. The laser cut aluminum skins are powder coated for a clean and durable finish. These doors provide full coverage, from the top of the body line to the lower plastics. Price includes pair of doors(driver and passenger side). Come powder coated in black.
The Geiser Performance Wind Diffuser is built to divert wind and dirt out of your face as well as add style to your ride.
Bolts on to any roll cage with supplied bolts.
Requires drilling of roll cage.
Screens and "G" come in raw and are bolt on for easy removal for paint.
CAN AM X3 FRONT A-ARM BRACE KIT
The Geiser Performance upper and lower a-arm braces replace the weak factory gusset plates as well as add and additional brace for the upper a-arms.
If you already have the Geiser Performance Bulkhead, you will only need one of the lower a-arm brackets.
CAN AM X3 HITCH RECEIVER PLATE
The Geiser Performance Hitch Receiver Plate is made from TIG welded 4130 chromoly for added strength and features a 2" hitch receiver.
Fits all X3 models.
CAN-AM X3 CLUTCH HOUSING AND BELT KIT
Combine the strength of the EVP BADASS “Worlds Best” CVT Belt and the protection from the Geiser Performance Clutch Housing Liner to get the protection that you need for your Can-Am X3!
*Belt and Clutch Housing Liner Only*
EVP has created a 3rdgeneration BADASS belt made from High-Twist Aramid Fibers and is designed for the riders and racers who are looking for the highest quality and performance in belt technology. These belts have great heat dissipation as well as better operating efficiency compared to other belts on the market.
The Geiser Performance single pieced Clutch Housing Liner is made from .080” Aluminum and is designed to prevent the clutch housing from being destroyed in the event of a belt breaking.
CAN AM X3 BUMPER AND BULKHEAD COMBO
The Geiser Performance Bumper and Bulkhead Combo adds superior strength to the front suspension and chassis as well as provide a stylish front bumper with a bolt-on skid plate. All made from 4130 chromoly.
PRP CAN-AM X3 STORAGE BAG FOR GEISER RACK
The perfect storage bag for your Can-Am Maverick X3. This custom fitted PRP bag fits perfectly inside the Geiser Performance Can-Am X3 Cargo Rack. The sturdy, weather resistant material and secure mounting system will keep your items safe on your side by side adventures!
BITD ENGINE TAGGING
All engines required, under BITD rules, must be sealed and tagged by an authorized shop. Geiser Performance is an officially authorized shop to offer this service. To setup an appointment for engine tagging please email firstname.lastname@example.org.
CAN AM X3 RADIUS RODS
The Geiser Performance Radius Rods replace the weak OEM links with stronger, fully adjustable 4130 chromoly steel links. These are undoubtedly the premier choice if you are in the market for a high quality set of radius rods.
Includes 2 triple rod configurations.
Fits all Can Am X3 models.
Come in black.
CAN AM X3 BOLT ON 2-SEAT ROLL CAGE
The Geiser Performance 2-Seat Roll Cage is built with two things in mind; strength and style. We use 4130 chromoly tubing on all of our cages for superior strength you can trust. Much like most other Geiser Performance parts, our cages are dual pass TIG welded for added strength and beautiful welds your friends will drool over. All cages come with a V-bar in the windshield, lightbar mounts, aluminum roof and 2 whip mounts. You also have the option of a full glass windshield and black powder coat. The cage is approximately 3" lower than stock for a more aggressive look.
*Shipping cost will be calculated and added after checkout. For a shipping quote please email email@example.com.
Please specify which light bar you are running in the comments at checkout.